Water Damage Cleanup Tips Everyone Should Know

Water damage to a home or business is harder to repair nowadays. Unfortunately, floods are a prevalent incident. They are common in locations with heavy levels of rainfall. Water penetration into home building materials such as wood, steel, and other similar products is the primary source of water damage, leading them to rot and cause damage.

Depending on the level of moisture and the damage location, this method can be slow or fast. For example, residential water damage is mainly caused by the basement sump pump failing, causing water to flood the basement. Failed water mains or broken pipes can cause substantial water damage. As a result, water damage restoration is based on the type of water problem that has occurred.

Water Damage Cleanup Process

Any property owner must be watchful of their home’s condition. Water damage can cause mold growth and structural damage, which will cost a lot to repair. Therefore, your number one priority must be to drain the water from the damaged area. Below are some guidelines for how to do water damage cleanup.

1. Find the source.

Locating the cause of the problem is one of the most crucial water damage cleaning processes. For example, do you have a roof crack? Is there a leak in the pipeline or an issue with the drainage system?

Knowing the source can help in determining the next step. For example, if there is flooding, you don’t have many options but to drive as much water as possible out. However, it’s also crucial to act quickly and identify the source of the leak.

2. Determine the extent of the damage.

You can now examine the area affected by the water damage once the leak has been slowed or stopped. Trace the extent of the damage horizontally and vertically to do this.

If it comes from the roof, look for discolorations on the ceiling and adjacent wall and the walls and floor. Next, check to see if the water has gotten into any close-by rooms. Lastly, check to see if the water has settled in any particular areas, like the basement.

3. Circulate air.

Maintaining ventilation is another crucial part of the water damage cleaning process. If you’re in the basement, you’ll need to allow ventilation to prevent mold and mildew from growing.

If you successfully take out the water, you can use an air blower to quickly dry the surface. If the damage is in the attic or on a higher level of your house, the air must be directed to the top floor and the ceiling from below. This will guarantee that the sub-floor and ceiling are completely dry. You can seek help from a professional, to find them search “water damage restoration near me”.

4. Keep humidity levels in check.

Water damage to wood is bad since this material expands when wet. Remove one or more of the panels if you have hardwood flooring so that the wood may breathe without being damaged. This will also let the airflow of the sub-layer, which may otherwise act as a perfect breeding place for molds.

Mold and other fungi develop in humidity levels ranging from 40 to 100°C. Control the humidity levels with a dehumidifier, getting rid of the extra water and making the area much drier. Remember to keep the percentages balanced because too dry or too wet can damage the room’s structures. Visit PuroClean Wellington for more details.


Cleaning up water damage may be a time-consuming and challenging task. Nevertheless, you may protect your loved ones by starting the cleaning process as soon as possible. After all, the most important part is to protect your loved ones. These water damage cleanup guidelines are just a few of the many options for keeping your property dry right after the damage is identified. Deal with the task if you are capable of doing so. However, if you do not have the required skills and equipment, seek professional assistance to effectively dry the area and prevent future damage.